SUITABLE TRANSPORTATION AND STORAGE OF U-PVC PIPES

During transportation of U-PVC pipe fracture and deformation of pipe sockets should be prevented. During transportation and storage, some support should be placed under the bodies of pipes so that the socket parts of pipes do not come into contact with the ground. During transport and storage, the pipes should be properly covered in order to prevent contamination and foreign substances from entering into the pipes.
If pipes are to be placed directly on each other, the contact of the socket parts of pipes should be avoided. In order to achieve this, the pipes must be placed side-by-side in the opposite direction, namely, one pipe socket next to one pipe without a socket.
During transport and storage, the height of the pipe set should not exceed 1.5 meters.
For the storage of pipes, at least 7.5 cm wide separation wedges must be used starting 1 meter away from the back of the pipe stack and at each 1 or 2 meters.

©2020- PIMTAS ALL RIGHTS RESERVED. TTR BİLİŞİM